DeatschWerks 9-654-1025 DW65V 265lph Fuel Pump for VW Audi 1.8T 2.0 TSI TFSI

$249.00
Tax included
The DW65v was designed specifically as a drop-in pump for VW/Audi applications such as 1.8t, 2.0 TSI, and 2.0 TFSI applications. 2 part numbers are available to fit FWD (9-654) and AWD (9-655). The DW65v flows 265lph at 40psi which is 40% more than the OE TT225 pump. In addition, the DW65v features a quiet and reliable turbine impeller which is compatible with pulse width modulated pump drivers. T...
Quantity
There are not enough products in stock

  • Security policy (edit with Customer reassurance module)
    Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module)
    Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module)
    Return policy (edit with Customer reassurance module)
DeatschWerks 9-654-1025 DW65V Fuel Pump

Description:

The DW65v was designed specifically as a drop-in pump for VW/Audi applications such as 1.8t, 2.0 TSI, and 2.0 TFSI applications. 2 part numbers are available to fit FWD (9-654) and AWD (9-655). The DW65v flows 265lph at 40psi which is 40% more than the OE TT225 pump. In addition, the DW65v features a quiet and reliable turbine impeller which is compatible with pulse width modulated pump drivers. The pump also features an encapsulated armature for compatability with ethanol based fuels. All DW fuel pumps are backed by a 3-yr no fault warranty.

DeatschWerks in-tank fuel pumps are manufactured with a quiet and reliable turbine impeller which is compatible with pulse width modulated pump drivers. These pumps are also built with carbon commutators and fully encapsulated armatures for ethanol compatibility. DW’s high-torque motors maintain flow at higher pressure better than competitors’ pumps. Low amperage draw minimizes pump temperatures, maximizes pump life and reduces stress on OE wiring. Vehicle-specific pumps include a fitment kit assembled with everything you need for your application. Vehicle specific install instructions are also available on our website to walk you step-by-step through the installation process.

Specification:

Weight 22.4oz (635grams)
External Materials Electroplated steel 
Inlet Fitting 32.0mm ID, 35.4mm OD 
Outlet Fitting 5/16" Hose Clamp 
PRV Activation >100psi 
Impeller Design Single Scroll Composite Turbine 
Connector Terminal Spade Pos/Neg 
Min Voltage Input 6 Volts 
Max Voltage Input 18 Volts 
Current Draw 40psi 10.5 Amps (13.5v) 

DeatschWerks
9-654-1025

Specific References